By continuing use this site, you agree to the Terms & Conditions and our use of cookies.

Build Your Tip - 21 Sleeve Drip Tip Configurator

The "Build Your Tip" project by BKS is born... Assemble your Drip Tip by choosing Base & Head among the hundreds of possible combinations!


€8.19
Available

Model
Color


€6.55
Available

Model
Color



€8.20
Last items in stock

Color
€22.93
Quantity :

Pack description

Build Your Tip - 21 Sleeve Drip Tip Configurator 

A configurator dedicated to the new component of the Build Your Tip platform: 21 Sleeve Adapter!

Select the base you prefer, your 21 Sleeve Adapter and combine them with one of the numerous Sleeve variants of the 21 drip tip by The Vaping Gentlemen Club!

For each combo purchased you will receive the Drip Tip assembled with 2 silicone o-rings and, inside the packaging, 2 spare Viton o-rings. A high quality polymer that stands out for its strength and hardness. We recommend the use of these special o-rings for a better seal when needed.


Pack content

Drip Tip Base - Build Your Tip by BKS

All the bases of the "Build Your Tip" project. Choose your base and combine it with a "head" to have your own personalized Drip Tip!

Internal hole sizes are the same for all models, with a 5mm anti-condensation flare at the base that narrows down to 3.8mm diameter.

All bases are available in Stainless Steel and DLC (limited edition) finish and are made of 316L steel.

--------------------------------------

DONNY

Our "radiator" base perfect combined with all atomizers with this type of aesthetic finish.

A real must for lovers of the Soviet look! Donny is perfect in combination with many attys from the BY-ka and Caiman series by Vape Systems... and much more!

- Height (with 510 connector): 8.8mm

- Height (without 510 connector): 3.9mm

- External Diameter: 10.6mm

--------------------------------------

JEFFREY

The classic "BKS" Drip Tip base, with the same design as our historic Fedor v2 and Mum v2 models.

Jeffrey can be combined with many atomizers on the market, obtaining a harmonious and linear aesthetic result.

When combined with the heads in "Maude" and "Bunny" models it is possible to recreate our classic Drip Tip "Mum v2" and "Fedor v2" with a brand new combi look!

- Height (with 510 connector): 8.5mm

- Height (without 510 connector): 3.6mm

- External Diameter: 10.6mm

--------------------------------------

LARRY

We made it big... here is the base for you if you are a lover of extra long Drip Tips!

Larry does not have a stop surface after the 510 connector, so the emerged part of the Drip Tip will be different based on the depth of the 510 housing of your atomizer. ***

- Height (with 510 connector): 20.9mm

- Height (without 510 connector): 16mm

- External Diameter: 8.5mm

--------------------------------------

NIHILIST

The most essential base of the "Build Your Tip" project. Perfect to get a Drip Tip with simple, clean and minimalist design.

Nihilist does not have a stop surface after the 510 connector, so the emerged part of the Drip Tip will be different based on the depth of the 510 housing of your atomizer. ***

- Height (with 510 connector): 8.5mm

- Height (without 510 connector): 3.6mm

- External Diameter: 8.5mm

--------------------------------------

WALTER

The ideal base for knurling and matchy matchy fetishists!

Walter is the lowest and at the same time the widest of the "Build Your Tip" base and is perfect to be combined with atomizers with knurled parts such as Flash-e-Vapor and Millennium RTA.

- Height (with 510 connector): 7.5mm

- Height (without 510 connector): 2.6mm

- External Diameter: 11.8mm

--------------------------------------

QUINTANA

The latest base created for the Build Your Tip project!

Quintana is incredibly versatile and fit perfectly with any head model you want to combine it with.

The ring machining, located 7.5mm from the bottom of the 510, allows Quintana to change its look depending on the depth of the drip tip seat of your atom!

For example, on the atomizers of the BY-ka series it will becoming a small and elegant pedestal for the combined head. While on most atomizers, the ring pattern will stay in suspension creating a beautiful effect.

- Height (with 510 connector): 8.8mm

- Height (without 510 connector): 3.9mm (variable)

- External Diameter: 11.5mm

----------------------------------

BRANDT

The base equipped on our Ellipse RTA.

Brandt offers particularly clean design which make it easy to combine with many atomizers.

The reduced height creates a small but stylish pedestal for your head you decide to match with. The 5 millings on the steel finally give it lightness, for an extremely pleasant final look.

- Height (with 510 connector): 8.0mm

- Height (without 510 connector): 3.2mm

- External Diameter: 10.3mm

----------------------------------

*** For the "Larry" and "Nihilist" models it is not recommended to use with atomizers without a stop on the bottom of the 510 housing, such as various RDA atomizers and some RDTAs.

Drip Tip Head - Build Your Tip by BKS

All the heads of the "Build Your Tip" project. Choose your heads and combine it with a base to have your own personalized Drip Tip!

Internal hole sizes are the same for all models, with 3.7mm diameter except for 21 Sleeve Adapter.

Heads are available in 7 different material: Black Delrin -  Stainless Steel - DLC (limited edition) - PC Clear - PC Frosted - Ultem Clear - Ultem Frosted.

--------------------------------------

BUNNY

A great classic that perfectly matches the geometry of our "Fedor v2" Drip Tip.

Its lines and the 8.5mm external diameter make it perfect for those looking for a Drip Tip not too elaborate but extremely comfortable to the mouth.

The Bunny head combined with the Jeffrey base recreates the classic "Fedor v2" with a brand new combi look!

- Height (with thread): 14.8mm

- Height (without thread): 11mm

- External Diameter: 8.5mm - 10mm

--------------------------------------

JACKIE

The former tallest head of the "Build Your Tip" family.

Jackie stands out thanks to its sinuous and elegant line, perfect for lovers of extra long Drip Tips.

A must on atomizers with a very hot steam production, thanks to its lenght Jackie will give you a pleasant heating dissipation effect.

- Height (with thread): 20.8mm

- Height (without thread): 17mm

- External Diameter: 7.2 - 8.5mm

--------------------------------------

MAUDE

The most compact head of all, which follows the shapes of the little bad boy "Mum v2". Our best selling Drip Tip ever!

If what you are looking for is comfort combined with a good hot steam, Maude is exactly what you are looking for.

Maude head combined with the Jeffrey base recreates the classic "Mum v2" with a brand new combi look!

- Height (with thread): 11.3mm

- Height (without thread): 7.5mm

- External Diameter: 8.5mm - 10mm

--------------------------------------

SMOKEY

The most eclectic of the series, but also incredibly comfortable to hold in the mouth.

Thanks to the sharp conical design in the upper part Smokey will allow you to literally cling to the Drip Tip with your lips.

Its uncommon aesthetic allows you to create interesting and unusual combinations with any base model.

- Height (with thread): 15mm

- Height (without thread): 11.2mm

- External Diameter: 7.2mm - 9.4

--------------------------------------

STRANGER

Basically the "Jackie's" little brother.

The balanced dimensions combined with the waisted design make the Stranger comfortable and elegant paired with any base model.

A little tip: create a combo with Stranger + Walter, mount it on a Millennium RTA and admire it!

- Height (with thread): 14.8mm

- Height (without thread): 11.5mm

- External Diameter: 7.4mm - 8.5mm

--------------------------------------

21 SLEEVE ADAPTER

A new extension for the Build Your Tip platform!

Thanks to 21 Sleeve Adapter you can house the beautifull sleeves of the Drip Tip "21" by The Vaping Gentlemen Club on any BYT base!

21 Sleeve Adapter consists of 2 threaded pieces.

The 21 Sleeves are available in different materials and colors, including precious woods and African buffalo horn.

***Sleeve not included, to be purchased separately!

- Height (with thread): 15.2mm

- Height (without thread): 11.5mm

- External Diameter: 9.0mm

- Hole Diameter: 2.7mm

----------------------------------

KNOX

The longest and most sinuous of our heads!

Not only the tallest, Knox has a clear narrowing at the top which gives a pleasant comfort on the lips.

A real must for slow-vape lovers, but also for those looking for maximum heat dissipation in a drip tip, without affecting the aromatic performance.

- Height (with thread): 24.9mm

- Height (without thread): 21.2mm

- External Diameter: 5.9mm - 8.5mm

----------------------------------

The Vaping Gentlemen Club - 21 Drip Tip Sleeve

Sleeve in various materials for the Drip Tip 21.

21 is the Drip Tip that you have known with the '900 and the Millenium RTA but it is much more than a normal Drip Tip.

Now also compatible with the bases of the BUILD YOUR TIP by BKS platform. Thanks to the specific "21 Sleeve Adapter".

*** ATTENTION: THIS IS THE SLEEVE ONLY; FOR THE COMPLETE DRIP TIP, LOOK FOR THE SPECIFIC PRODUCT ***

--------------------------------

YOU MIGHT ALSO LIKE